概述
SAP型泵是單級雙吸中開式離心泵 ，該型泵在SA型泵的基礎上，進行結構優化設計而發展的新系列產品。本系列產品既保持了SA型泵的水力性能好、效率高的特點，又在結構上綜合了西德KSB公司和美國IR公司雙吸泵的技術作了新的改進，使之更合理、更可靠。
本系列產品供輸送不含固體顆粒的清水和物理化學性質類似于水的其余液體，被輸送的介質溫度為0°C~80°C，適用于工廠、城市、礦山、電站、水利工程等的排水或給水用泵。
參數范圍
流量：Q：72—12258m3/h
揚程：H：6.8—143m
允許最大進口壓力：6×105Pa
型號表示的意義
        如10SAP－6JA
        10—吸入口徑被25除（既吸入口徑為250毫米）
        SAP—單級雙吸離心泵
        6—比轉數被10整除后的圓整數
        J—泵轉數改變（保持原來轉速時不表示）
        A－泵葉輪外徑的改變(最大直徑時不表示)
泵旋轉方向
  從電機端看為逆時針方向，即吸水口在左、吐出口在右.用戶若有更改方向、增加軸伸、改變軸封方式、更換過流部件材等要求,均可與本廠協商解決.
CENERAL
  Type SAP pump belonge to single－stage double－suction split centrifugal kind based on Type SA pump and developed inseries products after its optimum design
In construction,it keeps specialities of Type SA pump in good hydralic property
And high efficency,together with improvement in cotruction of duuble－suction
technology comrehensively absorbed from KSB CO .Germany and IR CO.U.S.A to
Make it more reasonable and reliable
  The series products are used to deliver clear water without solid particles or other liquids similar to clear water physically and chemically with the temperature of0°C¬80°C and suitable for darinage project and feed pump in factory,city,mine,power station ,feld irrig ation and water conservancy
Parameters range:
  Capacity Q:72 – 12258m/h
  Head     H:6.8 -143m
  Permissible maximum inlet pressure:6×10Pa
Description of pump symbol figures:
  For esample 10SAP – 6JA
  10 – The number,obtained the inlet diameter divided by 25(inlet diameter is 250mm)
  SAP – Single stage double suction centrifugal pump
  6 – The number obtained from the specific speed divided by 10
  J – The rotation speed of the pump has been changed (no indication when
  maintaining the original speed)
  A – Outer diameter of impeller has been changed(no indication when maintaining
  The original diameter of impeller)
Rotation direction of pump shaft:
  The rotation of shaft is counterwise looking from motor end.Punp’s inlet is on the leftside and outlet is on the rightside,If the client wants to change the shaft sealing and the materials of the components by which the liguid passes,Our workes would like to achieve the order under favourable discussion
結構說明
本型泵的吸入口與吐出口均在水泵軸心線的下方，與軸線垂直成水平方向。檢修時無需拆卸進出口水管及電動機。從傳動方向看去。SAP型泵為逆時針方向旋轉。（根據用戶需要亦可改為順時針方向旋轉）
泵的主要零件有—：泵體、泵蓋、葉輪、軸、雙吸密封環、軸套等。除軸的材料為優質碳鋼外，其余主要零件為鑄鐵制成。
泵體與泵蓋構成葉輪的工作室。在進出水法蘭上，制有安裝真空表和壓力表的管螺孔。進出水法蘭的下部，制有放水和管螺孔（可根據客戶要求采用不繡鋼軸與青葉輪）
經過靜平衡校驗的葉輪，用軸套和兩邊的螺母固定在軸上，葉輪的軸向力利用其葉片對稱布置、兩面進水達到平衡。
泵軸由單列向心球軸承支承，軸承裝在軸承體內。安裝在泵體兩端。
雙吸密封環用以減少水泵壓水室的水漏回吸水室。
泵通過彈性聯軸器由電動機直接傳動，必要時亦可用內燃機傳動。
軸封為軟填料或機械密封。為了防止空氣進入泵內和冷卻潤滑密封腔，在填料之前裝有填料環，水泵工作時少量高壓水，通過泵蓋中開面上的梯形凹槽或水封管流入填料腔或機械密封腔。起水封作用。